Pulse Counter Units and Displays

KFU8-DW-1.D
Rotation Speed Monitor

Speed monitoring up to 40 kHz, 1 pre-select value with relay output and LED indicator, 2-, 3-, 4-wire and NAMUR sensors as well as rotary encoder connectable, Start-up delay, Menu driven operation via 4 front keys, Construction type: modular terminal housing in Makrolon, System KF
For use in the switch cabinet/switch cabinet module, Rated voltage: 200 … 230 V AC ; 100 … 130 V AC; 50 Hz
20 VDC … 30 VDC

KC-LCDC-48-2R-230VAC
Timer, Counter, Tachometer
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 2 pre-selections, Easy-to-read backlit 2-line LCD display with icons for the displayed preselection and the status of both outputs, Multicolor display

KC-LCD-24-24VDC
Pulse/batch controller
PNP and NPN sensors can be connected, Easy-to-read 7-digit LCD display, Degree of protection IP65 (front only)

KC-LCD-48-1R-230VAC
Timer, Counter
Counter/Timer, Adding/subtracting via 2 separate inputs, Batch controller with 1 pre-selection, Easy-to-read, 2-line LCD display with symbols for indicated pre-selection and output status, Display range and preselection range from -999999 up to 999999
Overflow will be evaluated correctly up to 1 decade

KC-LCD-48-1R-24VDC
Timer, Counter
Counter/Timer, Adding/subtracting via 2 separate inputs, Batch controller with 1 pre-selection, Easy-to-read, 2-line LCD display with symbols for indicated pre-selection and output status, Display range and preselection range from -999999 up to 999999
Overflow will be evaluated correctly up to 1 decade

KC-LCDC-48-2R-24VDC
Timer, Counter, Tachometer
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 2 pre-selections, Easy-to-read backlit 2-line LCD display with icons for the displayed preselection and the status of both outputs, Multicolor display

KC-LCDC-48-2T-230VAC
Timer, Counter, Tachometer
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 2 pre-selections, 2 potential-free optocoupler outputs, Easy-to-read 2-line LCD display, color, with icons for the displayed preselection and the status of both outputs

KC-LCDC-48-2T-24VDC
Timer, Counter, Tachometer
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 2 pre-selections, 2 potential-free optocoupler outputs, Easy-to-read 2-line LCD display, color, with icons for the displayed preselection and the status of both outputs

KC-LCDC-48-6T-24VDC
Timer, Counter, Tachometer
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 6 pre-selections, 6 floating optocoupler outputs, Easy-to-read, 2-line LCD display with symbols for indicated pre-selection and the status of the two outputs

KC-LCDL-48-2R-230VAC
Timer, Counter, Tachometer
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 2 pre-selections, Easy-to-read backlit 2-line LCD display with icons for the displayed preselection and the status of both outputs, Display range and preselection range from -999999 up to 999999
Overflow will be evaluated correctly up to 1 decade

KC-LCDL-48-2R-24VDC
Timer, Counter, Tachometer
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 2 pre-selections, Easy-to-read backlit 2-line LCD display with icons for the displayed preselection and the status of both outputs, Display range and preselection range from -999999 up to 999999
Overflow will be evaluated correctly up to 1 decade

KC-LED-96-1T-24VDC
Timer, Counter, Tachometer
Counter/Timer/Tachometer, Extremely bright, large LED indicator, 1 pre-select value with transistor output, Adding/subtracting via 2 separate inputs, PNP and NPN sensors can be connected

KCM-51-C
Counter
Electromechanical summator, 5 decade devices, Counter frequency 10 Hz, Manual reset, Power supply 24 V DC or 230 V AC

KCM-51-V
Counter
Electromechanical summator, 5 decade devices, Counter frequency 10 Hz, Manual reset, Power supply 24 V DC or 230 V AC

KCM-70-C
Counter
Electromechanical summator, 7 decade devices, Counter frequency 10 Hz, Without reset, Power supply 24 V DC or 230 V AC

KCM-70-V
Counter
Electromechanical summator, 7 decade devices, Counter frequency up to 25 Hz, Without reset, Power supply 24 V DC or 230 V AC

KCM-70A-C
Counter
Electromechanical summator, 7 decade devices, Counter frequency up to 25 Hz, Without reset, Power supply 24 V DC or 230 V AC

KCM-70A-V
Counter
Electromechanical summator, 7 decade devices, Counter frequency up to 25 Hz, Without reset, Power supply 24 V DC or 230 V AC

KCT-6S-C
Timer, Counter, Tachometer
Counter frequency up to 20 kHz, LED indicator, red, 6 decade devices, Operation via keypad, Two counter inputs

KCT-6ST-C
Timer, Counter, Tachometer
Counter frequency up to 20 kHz, LED indicator, red, 6 decade devices, Operation via keypad, Two counter inputs

KCT2-6ST-V
Counter/Timer/Tachometer
Counter/Timer/Tachometer, Extremely bright, large LED indicator, 1 pre-select value with transistor output, PNP and NPN sensors can be connected, Adding/subtracting via 2 separate inputs

KCY1-6SR-B
Timer, Counter
Simple pre-selection setting via one button per decade, Easy-to-read 2-line LCD indicator, With battery operation, PNP and NPN sensors can be connected, Relay output

KFD2-SR2-2.W.SM
Standstill and Rotational Direction Monitor
2-channel signal conditioner, 24 V DC supply, PNP/push-pull, dry contacts or NAMUR inputs, Selectable frequency trip values, 2 relay contact outputs, Start-up override, Selectable mode of operation, Up to SIL 2 acc. to IEC 61508, Function (P2P): Limit value+rotation direction/slip, Rated voltage: 20 … 30 V DC, Output: 2 x 1 changeover contact, SIL/IEC 61508

KH-LCD-24-24VDC
LCD-timer
Timer/hour meter, Separate start input available, Easy-to-read 7-digit LCD display, Lockable reset, Degree of protection IP65 (front only)

S1SD-1FI-1R
Rotation Speed Monitor
1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors, Input frequency 10 mHz … 50 kHz, Relay contact output, Start-up override and restart inhibit, Configurable by DIP switches and software, Connection via screw terminals

TC-6A-V
Counter/Timer/Tachometer
Counter/Timer/Tachometer with analog voltage and current output, Bright 6-digit LED indicator, AC/DC multi-range power pack, Counter frequency up to 25 kHz, Power supply for pulse generator

KC-LCDC-48-6T-230VAC
Timer, Counter, Tachometer
Counter/Timer/Tachometer, Adding/subtracting via 2 separate inputs, Batch controller with 6 pre-selections, 6 floating optocoupler outputs, Easy-to-read, 2-line LCD display with symbols for indicated pre-selection and the status of the two outputs

KCT1-6SR-C
Batch controller
Counter/Timer/Tachometer, Counter frequency up to 20 kHz, 6-digit LED indicator, red, 1 Pre-selection, Status LED indication for output an preselection value

KCT1-6SR-V
Batch controller
Counter/Timer/Tachometer, Counter frequency up to 20 kHz, 6-digit LED indicator, red, 1 Pre-selection, Status LED indication for output an preselection value

KCT1-6WR/RS232-V
Counter/Timer/Tachometer
Counter/Timer/Tachometer, 6-digit LED indicator, red, 2 independent pre-select values, RS 232 interface for parameter assignment, Status LED indication for output an preselection value

KT-LED-96-2R-230VAC
Temperature control unit with LED display
Degree of protection IP65 (front only)

KT-LED-96-2R-24VDC
Temperature control unit with LED display
Galvanic isolation, Polarity reversal protected, Degree of protection IP65 (front only)

Process Displays

DA5-IU-C
Process indicator
Bright, high contrast 5-digit LED indicator, Leading zero suppression, Adjustable decimal point, Maximum- and minimium-value display

DA6-IU-2K-C
Process control and indication equipment
2 adjustable trip values, 2 relay outputs, Operation via keypad, Characteristic programmable via 12 interpolation points, Resetting the outputs, automatic, manual or with external signal

DA6-IU-2K-V
Process control and indication equipment
2 adjustable trip values, 2 relay outputs, Operation via keypad, Characteristic programmable via 12 interpolation points, Resetting the outputs, automatic, manual or with external signal

KT-LED-24-PT100-24VDC
LED temperature display
Temperature display in °C or °F, Resolution up to 0.1 °C, Extremely bright, large LED indicator, RTD types Pt100, Ni100 in 2-, 3-, or 4-wire mode, Galvanic isolation

DA6-SSI/A-U
SSI display
Large 6-digit LED display with adjustable brightness, Master or slave operation , Suitable for all SSI formats up to 25 bit, Pulse frequencies from 100 Hz to 1 MHz

KT-LED-24-TC-24VDC
LED temperature display
Temperature display in °C or °F, Resolution up to 0.1 °C, Extremely bright, large LED indicator, For thermocouples J, K, and N, Galvanic isolation

KT-LED-96-2R-230VAC
Temperature control unit with LED display
Degree of protection IP65 (front only)

KT-LED-96-2R-24VDC
Temperature control unit with LED display
Galvanic isolation, Polarity reversal protected, Degree of protection IP65 (front only)

Signal Converters

KCD2-E2L
Sensor output interface terminal

Single-channel terminal amplifier with line breakage detection, input for NAMUR sensors, DC 24 V supply voltage, standardized interface to prevent signal transmission errors, switching state display, LED yellow

KCD2-EL
Sensor output interface terminal

1-channel terminal amplifier, NAMUR sensor input, DC 24 V supply voltage, Standard interface for prevention of signal transmission errors, Switching status indicator, yellow LED

KCD2-R
Sensor output interface terminal

Relay output with 1 pole, yellow LED indicates switching state, Free-wheeling diode, Compact terminal housing, Clips onto standard 35 mm rail to DIN EN 50 022, Degree of protection IP20

KFU8-FSSP-1.D
Frequency voltage current converter

Limit frequency 40 kHz, Voltage or current ouptput, Incrementing output
(Spacing factor 1 … 9999), Multi-range power pack, 2-, 3-, 4-wire and NAMUR sensors as well as rotary encoder connectable, Rated voltage: 200 … 230 V AC ; 100 … 130 V AC; 50 Hz
20 VDC … 30 VDC

K23-SSI/R2/25B-C
Signal converter
Suitable for the connection of sensors and absolute encoders with SSI interface, Converts both SSI data and serial data into a parallel format, Parallel output 25 bit (Push-pull, short-circuit proof), RS 232 Interface for the serial read out of sensor information, SSI:Master or slave operation

K23-SSI/R2/IU-C
Signal converter
Suitable for the connection of sensors and absolute encoders with SSI interface, Analog output 0/4 mA … 20 mA, RS 232/RS 485-Interface for serial readout of sensor information, SSI:Master or slave operation , Specified option for arbitrary linearization characteristics

KCD2-E1
Sensor output interface terminal
1-channel terminal amplifier, NAMUR sensor input, DC 24 V supply voltage, Standard interface for prevention of signal transmission errors, Switching status indicator, yellow LED

KCD2-E3
Sensor output interface terminal
1-channel terminal amplifier, NAMUR sensor input, DC 24 V supply voltage, Standard interface for prevention of signal transmission errors, Switching status indicator, yellow LED

KFU8-FSSP-1.D-Y180599
Frequency voltage current converter
Limit frequency 40 kHz, Voltage or current ouptput, Incrementing output
(Spacing factor 1 … 9999), 2-, 3-, 4-wire sensors and rotary encoder can be connected, Auxiliary power output for sensors, Rated voltage: 20 … 30 V DC

KFU8-UFT-2.D.FA
Frequency Converter with Direction and Synchronization Monitor
2-channel signal conditioner, Universal usage at different power supplies, Dry contact or NAMUR inputs, Input frequency 1 mHz … 1 kHz, Current output 0/4 mA … 20 mA, Relay and transistor output, Start-up override, Configurable by PACTware or keypad, Line fault detection (LFD), Function (P2P): Frequency current converter with trip value and rotation direction/slip, Input: Rotational speed/frequency, Rated voltage: 20 … 90 V DC / 48 … 253 V AC 50 … 60 Hz

KFU8-UFC-1.D.FA
Frequency Converter with Trip Values
1-channel signal conditioner, Universal usage at different power supplies, Input for 2- or 3-wire sensors, NAMUR sensors or dry contacts, Input frequency 1 mHz … 12 kHz, Current output 0/4 mA … 20 mA, Relay and transistor output, Start-up override, Line fault detection (LFD), Up to SIL 2 acc. to IEC 61508/IEC 61511, Function (P2P): Frequency current converter + trip value, Rated voltage: 20 … 90 V DC / 48 … 253 V AC 50 … 60 Hz

Switch Amplifiers

KFA6-SR-2.3L.FA
Switch Amplifier
2-channel, 115/230 V AC supply, 3-wire PNP/NPN sensor or push-pull input, Relay contact output, DIP switch selectable functions, Minimum/maximum control, Up to SIL 2 acc. to IEC 61508, Input: Contact, Rated voltage: 90 … 253 V AC , 45 … 65 Hz, Output: relay